|
Straightedge Tool Guide / Model No. :
308-STG-85
¡@
This clamp is a 5/8" thick anodized aluminum channel with
a full-length tensioning rod built in. You place the clamp
on your work, slide the tailpiece along until it is snug,
and then flip the cam to lock the channel in position. The
cam has two pressure positions and the tailpiece has a
side-squeeze release. Jaws are 1/2" high by 1-1/2" wide.
Useful as a clamp, it is invaluable as a tool guide since
the low profile lets a router or hand-held circular saw
pass by unimpeded. It can even be used as a fence when
needed.
| 
