|
¡@
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
| Description |
| 1.Replaceable cutter blades and
pilot drill. Economical, replace the blades or drill, not the
complete circle cutter. |
| 2.Precision sharpened cutter blades
for smooth, accurate cuts. |
| 3.To extend cutting depth to 50mm,
stop boring when the pilot drill break through. Then, using the
drill hole as a guide, bore the hole from the other side. |
| 4.Tighten tightly screws securely
before boring. |
| 5.Hold the power-drill firmly to
resist the clockwise twisting motion when the cutter begins to
bore. |
| 6.10mm hexagonal shank. |
| 7.Scale reads for diameter. |
| 8.Measurement in millimeter &
inch. |
|
| Specification: |
| Model No. |
HH-120 |
HH-200 |
HH-300 |
|
Cutting Diameter
|
40 -120mm
|
40 - 200mm |
40 - 300 mm |
|
Cutting Thickness
|
3mm-50mm
|
3mm-50mm
|
3mm-50mm
|
|
Blade Type
|
Twin
|
Twin
|
Twin
|
|
Blade Material
|
High Speed Steel
|
High Speed Steel
|
High Speed Steel
|
|
Cutting Materials
|
Veneer. Plywood. Wood-board. Plaster-board. Acrylic Sheet.
Thin asbestos-slate, etc.
|
Veneer. Plywood. Wood-board. Plaster-board. Acrylic Sheet.
Thin asbestos-slate, etc.
|
Veneer. Plywood. Wood-board. Plaster-board. Acrylic Sheet.
Thin asbestos-slate, etc.
|
|
¡@
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
| CAPACITY |
| 1.Replaceable cutter blades and
pilot drill. Economical, replace the blades or drill, not the
complete circle cutter. |
| 2.Precision sharpened cutter blades
for smooth, accurate cuts. |
| 3.To extend cutting depth to 50mm,
stop boring when the pilot drill break through. Then, using the
drill hole as a guide, bore the hole from the other side. |
| 4.Tighten tightly screws securely
before boring. |
| 5.Hold the power-drill firmly to
resist the clockwise twisting motion when the cutter begins to
bore. |
| 6.For hard
materials cutting. |
| 7.10mm hexagonal shank. |
| 8.Scale reads for diameter. |
| 9.Measurement in millimeter &
inch. |
|
| Specification: |
|
Model No. |
HT-120 |
HT-200 |
HT-300 |
|
Cutting Diameter
|
40-120mm
|
40- 200 mm
|
40-300 mm
|
|
Cutting Thickness
|
10mm-50mm
|
10mm-50mm
|
10mm-50mm
|
|
Blade Type
|
Twin
|
Twin
|
Twin
|
|
Blade Material
|
Tungsten Carbide Steel
|
Tungsten Carbide Steel
|
Tungsten Carbide Steel
|
|
Cutting Materials
|
thick asbestos-slate,Hard materials, etc.
|
thick asbestos-slate,Hard materials, etc.
|
thick asbestos-slate,Hard materials, etc.
|
|
¡@ |
